CR-140

CR-140 Roaster Technical Data
General Information
Green coffee capacity, Min-Max 20 – 140 kg
Dimensions, maximum L x W x H 5309 x 3226 x 4089 mm
Shipping weight (Approximate) Actual shipping weight may vary
Roaster and main electrical panel    2,604 kg
Cooling Bin 980 kg
Other Components Available upon request
Shipping crate size, L x W x H Actual crate size may vary
Roaster and main electrical panel 2235 x 2464 x 2540 mm
Cooling Bin 2845 x 2261 x 1270 mm
Other Components Available upon request
Full batch roast time to 227°C Approximately 15 minutes
Hourly output, 15 minute roast 560 kg/hr
Roast Air, maximum 3,021 sm3/h
Cooling Bin Air, maximum 5,947 sm3/h
Loader Exhaust Air, maximum 3,631 sm3/h
Destoner Exhaust Air, maximum 6,933 sm3/h
Roast Air Cyclone outlet diameter 356 mm
Cooling Bin Blower outlet diameter 406 mm
Cooling Bin Cyclone outlet diameter 457 mm
Loader Exhaust diameter 203 mm
Destoner Exhaust diameter 203 mm
Temperature high limit 246°C burner off, 252°C pilot off
Air Pressure 4.8 bar
Air Connection ¼” female NPT on the roaster
Water Pressure 2.75 – 4.8 bar
Water Connection ¼ inch female NPT on the roaster
Water flow to roaster at 2.8 bar 15.14 liters per minute
Water flow to chaff barrel at 2.8 bar 15.14 liters per minute
Electrical Information
Volts AC 200-240V 1PH or 3 PH; or 380-480V 3PH
Frequencies 50Hz or 60Hz
Full Load Amps; Roaster without loader 57.5 Amps at 230V 1PH 50/60Hz
34.6 Amps at 230V 3PH 50/60Hz
19.9 Amps at 480V 3PH 50/60Hz
Full Load Amps; Roaster with loader 65.6 Amps at 230V 1PH 50/60Hz
38.8 Amps at 230V 3PH 50/60Hz
22.6 Amps at 480V 3PH 50/60Hz
Main Breaker size 90 Amps at 230V 1PH 50/60Hz
60 Amps at 230V 3PH 50/60Hz
30 Amps at 480V 3PH 50/60Hz
Gas Information
Gas Types (others if pre-approved) Liquid Propane (LP) or Natural Gas (NG)
Maximum consumption 351.7 kW
Typical consumption per roast 66.4 kWh
Inlet Pressure LP 68.9-137.9 mbar
Inlet Pressure NG 68.9-137.9 mbar
Inlet gas supply connection 1 inch female NPT on the roaster
Interested?

Please fill-up the form below to know the price and to get more information on the machine